Magnetised Seaking

I recently was commissioned to magnetise a Trollblood Seaking Gargantuan to make it easier for the client to transport. I knew it was a tall model but it wasn't until I got the model in my hands that I truly grasped how big!    

Being an organic model it is harder to magnetise in general, the curved pieces don't lend themselves to the process as well and a warjack for example. It took a lot of dry fitting and planning to decided where to put the magnets.

The models arm which isn't holding the anchor had a fairly big gap that really looks like it needs gap filling with green stuff. I contacted the client and he was happy for me to not magnetise this arm, especially as the arm fits much closer to the models body so shouldn't make it harder to transport.

To attach the anchor arm I used a combination of 10mm magnets and also a long pin. The pin is to help stop the arm from rotating downwards under the weight of the anchor and arm.

Matching up the position of the magnet in the arm as well as the pin hole was tricky but taking time to line it up right was worth the extra effort.

I sunk a magnet into the hole the anchor chain goes into, I was going to add pins as well, but as it turns out the 3mm magnets were strong enough to hold the anchor in place nicely.

To make it even easier to transport I also magnetised the trailing anchor chain on the other side of the fist using two 2mm magnets. Maybe a bit unnecessary to some, but should make it a lot easier to fit in a case. 

I hope this post is helpful for you if you decide to magnetise your Seaking! If it was helpful please let me know, its great to get feedback from you guys so I can know how or what to improve.

If you would like me to magnetise something for you, or pin or convert something feel free to get in touch at 

thomasgbell84@googlemail.com

(I'm based in the UK)